AutoCAD Civil 3D - Civil Engineering Software Skip to main content

AutoCAD Civil 3D - Civil Engineering Software

AutoCAD Civil 3D - Civil Engineering Software
Civil Engineering Software:

This is Software that is used by Civil Engineers and Architects to plan, design, and manage civil engineering projects which have simple to complex level.

The software is so diversified that it is used by many streams such as:

  1. Construction Area Development Project
  2. Structural Engineering
  3. Road and Rail Transportation Engineering
  4. Dam Construction
  5. Harbour-Port Construction
  6. Canal and Bank Embankment Project Engineers
  7. Land Survey and Drafting Projects
AutoCAD Civil 3D - Civil Engineering Software
Such projects are used in road & rail corridors and which makes it easy to develop the turns and provide superelevation and other features which the program does it itself.
This software is different from normal AutoCAD and it has some more features than the normal one.

The major use of this new software is:

  • It saves money and time and reduces the dynamic errors 
  • It reduces the cost and development process for overall software with a one-stop solution
  • Gives more alternative solutions
  • Creates production sheet
  • The design and production sheets are always in sync
  • Build custom foundation solution
So, with this all benefits you get 3D visualization and understand the project better and find a new solution for the same.

Comments

  1. Your content is really good thanks for sharing this knowledgeable content and if anyone looking for best tally institute in delhi so contact here +91-9311002620 visit https://www.htsindia.com/Courses/tally/tally-training-course

    ReplyDelete

Post a Comment

Thank You for visiting, if you have any questions please feel free to ask:

Popular posts from this blog

Great Man-Made River (GMR)

Libya's Great Man Made River: The Great Man-Made River in Libya is one of the most ambitious Civil Engineering Project in history of mankind.  In the year 1953, the Libya Government found out not only vast oil reserves but also vast quantity of fresh water locked under the strata, most of the water was trapped around 7000-30000 years ago which is divided in 4 different basins. The first basin is named Kufra basin which is neat Egypt Border which covers almost 35000 sq kilometer which is quite deep around 2000 m deep. The other basin is in Sirte Basin which cover 10000 sq kilometer, third in Murzuk Basin and the last in Jabal Fezzan Basin covering 4800 sq kilometers area.  The GMR project will be used to transfer water to North of the country to provide water for irrigation purpose for more than 6 million  people. This will be a changing point  for Libya and the Colonel Muammar Gaddafi called it the Eighth Wonder of World. The work started in 1984 of the project and estimated to be

DDSS - Roof Truss

Design Of Roof Truss: If load from purlin, false ceiling etc are applied in between the nodes, then principal rafters or main ties are designed for combined stresses from bending and axial loads. IS 800 - 2007 provides general design procedure for the angle Purlins conforming to steel grade of Fe 410 of O, S, W  and not exceeding slope more than 30 degree based on live load of 750 N/m2. Loads on Trusses: Dead Load, Live Load, Wind Load and Snow Load are types of loads on the truss. The main in Design of Truss in small truss and some Industrial Truss. Dead Load (DL): If spacing of Truss is 4 m and pitch of truss is 1:4 then self weight of the truss is taken as, w = (l/3+6) of plan area .... in kN/m2. Then add all the dead loads with this such as GI sheet, AC sheet and Purlins weight. Then multiply with the plan area to get the actual DL. Live Load(LL): If the angle is less than 10 degree, then the LL will be directly taken as 750 N/m2. If slope of truss is more than 10 degree, live load

Timber Buildings !?

 Why do we need a timber building? Yes, timber buildings. As on earth human population is on an exponential rise, many and many people are trying to get home in a city where they have easy excess for the workplace for their own living. In the near future, as the population gets more concentrated in cities more and more structures I mean Tall Structures need to be built. Loading Bearing and Comparison So now architects and builders have opted for the old Technic of using timber as a building material eliminating concrete and steel. Yes, it is very hard to find this amount of trees but not impossible. It can be grown and regrown as needed. Many projects have been in progress of this idea and it reduces about 75% of carbon emission as compared to concrete and steel structure. Using timber coming directly from the forest doesn't have the appropriate strength required for a high-rise building. So designers came up with the new idea of CLT i.e. Cross Laminate Tim