Civil Engineering Internships In 2020 Skip to main content

Civil Engineering Internships In 2020

Civil Engineering Internships

Civil Engineering Internships in 2020
Core Engineering
stream such as Civil Engineering and Mechanical Engineering have faced sever problem due to the lockdown in India. But due to the steps by the Government will change the situation.
We As A Generation Have Never Seen Such Things ... Which Happened In Past Few Months
I have listed many things in the last blog where you can do things at home via e-learning in Coursera, Udemy  and some software companies such as Trimble-Tekla and many other option.
Check This Blog 
In this blog article we will see some Internship Options such as "Still A Student" and "Under Graduate" such as:
Be Vigilant While Choosing

Still A Student:

  • Internshala

This is one of the most used mode of doing a internship and also has many option which can suit you.

  • Government Metro Works (Third Year student minimum)

Mumbai, students in Mumbai and in it's vicinity have great opportunity to an internship in Metro Rail Department, but there is a minimum criteria to be a Third Year Student.

  • Many Construction Companies

You can directly go to the website of the company or to there branch office and apply for internship. The forms are also available in almost all websites and can be given via post or e-mail service.

Under Graduate:

  • Google Jobs Site

Simply searching on Google can find you out many options but you have to be vigilant and choose the right thing.

  • LinkedIn

LinkedIn is one of the best place to find people of your own stream and see what new things are going on in the market. There you can find many internship and job offerings which can help you in better placement

  • Internshala

As discussed in the students section we also see many UG students go for this option too.

Comments

Popular posts from this blog

Great Man-Made River (GMR)

Libya's Great Man Made River: The Great Man-Made River in Libya is one of the most ambitious Civil Engineering Project in history of mankind.  In the year 1953, the Libya Government found out not only vast oil reserves but also vast quantity of fresh water locked under the strata, most of the water was trapped around 7000-30000 years ago which is divided in 4 different basins. The first basin is named Kufra basin which is neat Egypt Border which covers almost 35000 sq kilometer which is quite deep around 2000 m deep. The other basin is in Sirte Basin which cover 10000 sq kilometer, third in Murzuk Basin and the last in Jabal Fezzan Basin covering 4800 sq kilometers area.  The GMR project will be used to transfer water to North of the country to provide water for irrigation purpose for more than 6 million  people. This will be a changing point  for Libya and the Colonel Muammar Gaddafi called it the Eighth Wonder of World. The work started in 1984 of the project and estimated to be

DDSS - Roof Truss

Design Of Roof Truss: If load from purlin, false ceiling etc are applied in between the nodes, then principal rafters or main ties are designed for combined stresses from bending and axial loads. IS 800 - 2007 provides general design procedure for the angle Purlins conforming to steel grade of Fe 410 of O, S, W  and not exceeding slope more than 30 degree based on live load of 750 N/m2. Loads on Trusses: Dead Load, Live Load, Wind Load and Snow Load are types of loads on the truss. The main in Design of Truss in small truss and some Industrial Truss. Dead Load (DL): If spacing of Truss is 4 m and pitch of truss is 1:4 then self weight of the truss is taken as, w = (l/3+6) of plan area .... in kN/m2. Then add all the dead loads with this such as GI sheet, AC sheet and Purlins weight. Then multiply with the plan area to get the actual DL. Live Load(LL): If the angle is less than 10 degree, then the LL will be directly taken as 750 N/m2. If slope of truss is more than 10 degree, live load

Timber Buildings !?

 Why do we need a timber building? Yes, timber buildings. As on earth human population is on an exponential rise, many and many people are trying to get home in a city where they have easy excess for the workplace for their own living. In the near future, as the population gets more concentrated in cities more and more structures I mean Tall Structures need to be built. Loading Bearing and Comparison So now architects and builders have opted for the old Technic of using timber as a building material eliminating concrete and steel. Yes, it is very hard to find this amount of trees but not impossible. It can be grown and regrown as needed. Many projects have been in progress of this idea and it reduces about 75% of carbon emission as compared to concrete and steel structure. Using timber coming directly from the forest doesn't have the appropriate strength required for a high-rise building. So designers came up with the new idea of CLT i.e. Cross Laminate Tim